Product name	Exterior	Applicable material	Dry condition	Curing system	Curing temperature	Temperature resistance（℃）	Remarks
TC-SS-609PPA/B	Colorless transparent liquid	Metal, PBT, PI, glass	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TS-SS-609PPA-1/PPB-1	Colorless transparent liquid	Nylon, glass, some metals	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-8020	Colorless transparent liquid	PET	80℃-100℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-8020PT	Colorless transparent liquid	PET、PEN	80℃-100℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-831PC	Colorless transparent liquid	PC	80℃-100℃	固态Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-831PCA/B	Colorless transparent liquid	PC	100℃-130℃	Liquid glue platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-609SA/SB	Colorless transparent liquid	Nylon, glass	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-609MH	Light yellow transparent liquid	Metal, PBT, epoxy, glass	80℃-120℃	Peroxide system vulcanization	160℃-180℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-931A/B	Colorless transparent liquid	PPSU, modified PC, metal, PI, PBT, glass, PET	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-751A/B	Translucent liquid (high viscosity)	Nylon, glass fiber	150℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
YET-B	Light yellow gelatinous	PET	150℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Add to rubber

1. First wipe the surface of the substrate to be adhered with a solvent to remove oil and dust on the surface of the substrate;
2. After the solvent has evaporated, apply a layer of 8020 adhesive evenly on the surface to be glued;
3. Transfer the substrate coated with the adhesive into the oven and bake at 60-100℃ for 5 minutes; if the adhesive force is not required, the substrate coated with the adhesive can also be allowed to stand at room temperature for 15 minutes (above The temperature has an impact on the adhesion), our company recommends baking at 100°C for 5 minutes for the best bonding effect. After spraying 8020, the substrate should be bonded with silica gel within 24Hr. If it takes longer, the substrate coated with 8020 must be placed in the drying room (reason: prevent hydrolysis and affect adhesion).
4. Take out the base material coated with 8020 and cool it to room temperature, and then heat-vulcanize and bond it with unvulcanized silicone rubber;

1. After the adhesive is used, the bottle cap should be covered at any time to prevent the solvent from evaporating or hydrolyzing and affecting the quality. If the glue is found to be turbid or precipitated, do not use it.
2. This product cannot be mixed with organic compounds containing N, P, S, etc., so as not to affect the bonding effect.
3. This adhesive is prepared by rigorously tested and optimized with the best formula ratio. Please do not dilute by yourself. Our company does not guarantee its bonding strength if it is used after being diluted with a solvent.

Appearance: transparent liquid
Composition: Ethyl orthosilicate
                      N-heptane
Titanate-silane coupling agent
1. 1KG/barrel (square iron barrel)
2. The shelf life is 6 months. After the shelf life, it can still be used after passing the inspection.

1. This product needs to be stored in a dry place at room temperature or low temperature to avoid sun exposure to avoid product decomposition.
2. This product contains organic solvents. It must be stored and transported in accordance with the flammable product rules. When using, pay attention to ventilation and prevent exposure to open flames.