Product name	Exterior	Applicable material	Dry condition	Curing system	Curing temperature	Temperature resistance（℃）	Remarks
TC-SS-609PPA/B	Colorless transparent liquid	Metal, PBT, PI, glass	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TS-SS-609PPA-1/PPB-1	Colorless transparent liquid	Nylon, glass, some metals	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-8020	Colorless transparent liquid	PET	80℃-100℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-8020PT	Colorless transparent liquid	PET、PEN	80℃-100℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-831PC	Colorless transparent liquid	PC	80℃-100℃	固态Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-831PCA/B	Colorless transparent liquid	PC	100℃-130℃	Liquid glue platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-609SA/SB	Colorless transparent liquid	Nylon, glass	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-609MH	Light yellow transparent liquid	Metal, PBT, epoxy, glass	80℃-120℃	Peroxide system vulcanization	160℃-180℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-931A/B	Colorless transparent liquid	PPSU, modified PC, metal, PI, PBT, glass, PET	100℃-130℃	Platinum system vulcanization	100℃-130℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
TC-SS-751A/B	Translucent liquid (high viscosity)	Nylon, glass fiber	150℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Sprayed or dipped on the surface of the substrate
YET-B	Light yellow gelatinous	PET	150℃	Platinum system vulcanization	100℃-170℃	-60℃-200℃	Add to rubber

       Note: This adhesive is formulated with the best formula ratio optimized by strict tests. For the use after dilution with too much solvent, our company cannot guarantee that its bonding strength meets your company's requirements for use. Please use it with caution or test confirmation If you use it later, you can also contact our company directly for special treatment.

1. 1/KG can
2. The shelf life is 3 months. After the shelf life, it can still be used after passing the inspection.

1. This product is best stored in a dry place at room temperature.
2. This product contains organic solvents and must be stored and transported in accordance with the flammable product rules. When using, pay attention to ventilation and prevent exposure to open flames.
3. After using the adhesive, cap the bottle at any time to prevent the solvent from evaporating.
4. The gluing tools can be oil paint brushes, brushes, etc. After use, they can be immersed in toluene, solvent oil or ester solvents for cleaning.
5. The effective storage shelf life of this product is 3 months. After the shelf life, it can still be used if it passes the inspection.