EN | CN
Odorless Curing Agent
TC-14B
TC-14B is a silicone bridging agent that can make silicone products produce light or even tasteless silicone products.
This product can be used in all silicone products except platinum flame-retardant silicone products. After TC-14B is vulcanized or boiled twice, the silica gel product can remove the peculiar smell, but this product is a flammable compound, so please pay attention to mixing and adding it in small quantities to prevent static electricity from ignition.
Instructions for use
Recommended Use
Precautions
Appearance packaging
Storage and transportation
Species Product name Exterior Active ingredients Vulcanization method Operating temperature Anti-yellowing performance Product smell Related testing
Molded Squeeze out Calender Not anti-yellowing General anti-yellowing High resistance to yellow REACH ROHS FDA
Odorless curing agent TC-14A Light yellow transparent gel Contains about 25% di-tert-butyl peroxide ●     170℃-190℃     ● Completely tasteless √ √ √
TC-14B Light yellow transparent gel Contains about 35% di-tert-butyl peroxide ●     170℃-190℃ ●     Completely tasteless √ √ √
TC-14BT Light yellow transparent gel Contains about 35% di-tert-butyl peroxide ●     170℃-190℃ ●     Completely tasteless √ √ √
TC-14C Light yellow transparent gel Contains about 50% di-tert-butyl peroxide ●     170℃-190℃   ●   Completely tasteless √ √ √
TC-14D Light yellow transparent gel Contains about 50% di-tert-butyl peroxide ●     170℃-190℃   ●   Light taste √ √ √
TC-14E Light yellow transparent liquid Contains about 98% di-tert-butyl peroxide ●     170℃-190℃ ●     Completely tasteless √ √ √
Double two five curing agent TC-101 Light yellow transparent liquid Contains about 95% bis-pentaperoxide ●     165℃-185℃ ●     Slight pungent smell √ √ √
C-8B Light yellow transparent gel Contains about 50% bis-pentaperoxide ●     165℃-185℃ ●     Slight pungent smell √ √ √
C-8A Light yellow paste Contains about 75% bis-pentaperoxide ●     165℃-185℃ ●     Slight pungent smell √ √ √
C-101P Light yellow translucent gel Contains about 40% bis-pentaperoxide ●     165℃-185℃   ●   Slight pungent smell √ √ √
C-20H Light yellow translucent gel Contains about 30% bis-pentaperoxide ●     165℃-185℃     ● Slight pungent smell √ √ √
C-6A Light yellow transparent gel Contains about 30% bis-pentaperoxide ●     165℃-185℃     ● Light taste √ √ √
C-15E Light yellow transparent gel Contains about 25% bis-pentaperoxide ●     165℃-185℃     ● Slight pungent smell √ √ √
Light yellow paste TC-P50X Light yellow paste物 Contains about 50% benzoyl peroxide ● ● ● 90℃以上 ●     Slight pungent smell      
Middle temperature curing agent TC-18B Light yellow transparent gel Contains about 50% 335 peroxide ●     140℃-170℃ ●     Completely tasteless √ √ √
TC-18C Light yellow transparent gel Contains about 35% 335 peroxide ●     140℃-170℃   ●   Completely tasteless √ √ √
Remarks: Product odor 5mm test piece, rubber material Shin-Etsu KE951, secondary vulcanization condition 200℃*2H.

1. The recommended use ratio is 1.0%-1.2%
2. Sulfuration temperature 170℃-185℃
3. Secondary vulcanization temperature: 180℃-200℃ (ie baking temperature)
Secondary curing time: 1 hour to 2 hours
Appearance: transparent gel
Ingredients: di-tert-butyl peroxide, silica gel, silica gel anti-yellow agent
1. Avoid high temperature, direct sunlight, keep away from sources of ignition, acidic substances, metal oxides, amines and flammable materials, and should be stored at room temperature 25℃.
2. The product is non-dangerous and can be transported as general chemicals.
Shelf life
15kg/barrel
6 months shelf life
The above information is for reference only, if you have any questions, please contact us.
Links: